51�Թ���

Washington, D.C. – America’s broken permitting system is costing manufacturers in America $7.9 billion each year, according to a new report released today by the 51�Թ��� and the Foundation for American Innovation—underscoring the urgent need for bipartisan, comprehensive permitting reform to strengthen America’s economic and national security. The findings highlight how widespread and complex federal permitting requirements have become, with manufacturers most commonly citing Clean Water Act permits (required for 82.1% of projects) and Clean Air Act permits (required for 72.6% of projects)—the latter noted as the most burdensome approval process.

The new report, “America on Hold: How Permitting Delays Stall Manufacturing Progress,” draws from a recent joint survey of manufacturers conducted between Dec. 9, 2025, and Jan. 15, 2026, examining the types of projects companies are pursuing, the permits they most frequently require, where uncertainty and regulatory complexity create challenges and which reforms would have the greatest impact. The findings reveal a permitting system that hits manufacturers hardest where they operate most often: routine upgrades, expansions and ongoing operations.

“Manufacturers are investing across America, but permitting roadblocks are holding projects back,” said 51�Թ��� President and CEO Jay Timmons. “It takes the U.S. up to 80% longer than our peer nations to move projects forward. Manufacturers want ribbon cuttings, not red tape—that means modernizing our laws to streamline regulations and eliminate duplicative reviews and a regulatory regime to support timely permitting and give manufacturers the certainty to invest, build and create jobs.”

From the 51�Թ���’s survey to manufacturers:

• 50.8% say permitting concerns discourage investment in new or expanded capacity.
• 65.6% would increase U.S. investment if permitting timelines were shorter and more predictable.
• The most common permitted activities are facility expansions and equipment upgrades, not megaprojects.

Until now, consolidated research demonstrating the full economic impact of the federal permitting system on manufacturing investment has been limited—largely due to the sheer number of laws and regulations governing permits, as well as the absence of a centralized federal repository of permitting data. The 51�Թ���–FAI report addresses that gap by combining publicly available permitting data with original industry survey results to provide one of the most comprehensive views to date on the cost of permitting for manufacturers.

The full report can be read here.

Methodology:

Using external and survey data, the 51�Թ���–FAI findings estimate that over the past 10 years, the U.S. manufacturing sector has incurred an average annual permitting burden of $7.9 billion+. To calculate, unit costs are derived by multiplying the 10-year federal permit counts with the total out-of-pocket and indirect costs of the permitting process, as detailed in the bullets below.

• The federal count of applications and final permits obtained by manufacturers over the past 10 years, categorized by permit type (i.e., NEPA, Clean Water Act, Clean Air Act, etc.)
• Out-of-pocket costs that include application fees, consultants, legal expenses and more from project delays
• Delays created by indirect costs, such as carrying costs, lost revenue from pushing back project initiation, inventory and contract impacts

-51�Թ���-��

The 51�Թ��� is the largest manufacturing association in the United States, representing small and large manufacturers in every industrial sector and in all 50 states. Manufacturing employs nearly 13 million men and women, contributes $2.95 trillion to the U.S. economy annually and accounts for 53% of private-sector research and development. The 51�Թ��� is the powerful voice of the manufacturing community and the leading advocate for a policy agenda that helps manufacturers compete in the global economy and create jobs across the United States. For more information about the 51�Թ��� or to follow us on Twitter and Facebook, please visit .

Featured Quotes from Chairman Bruce Westerman and Manufacturing Leaders

“The federal permitting process is broken, and this report confirms what we already know: clarity and certainty must return to the process to jumpstart projects, end duplicative reviews, reform judicial review processes and boost project investments in the United States. My bipartisan SPEED Act will tackle these issues to let America build again, so we can remain a global leader across all industries, including manufacturing.” – House Committee on Natural Resources Chairman Bruce Westerman (R-Ark.)

“Regulatory uncertainty is one of the most significant hurdles our customers face as they consider placing new equipment orders with Husco. Permitting delays and denials can derail projects that enhance our economy and provide family-sustaining jobs for workers. A comprehensive effort to streamline the permitting process would represent a significant step forward. Common-sense reforms to the National Environmental Policy Act are just one example of many that would help expedite new investment. We fully support 51�Թ���’s ongoing and important efforts in this area.” – Austin Ramirez, President and CEO of Husco and 51�Թ��� Small and Medium Manufacturers Group Vice Chair

“Projects that strengthen our energy system can face years of unnecessary delays under the current NEPA framework. Uncertain timelines, duplicative reviews, overly expansive analyses, and lengthy litigation can stall or even cancel critical infrastructure. Modernizing NEPA is a critical step toward providing greater certainty for developers and communities so we can deliver the energy needed to support American jobs, strengthen supply chains, and keep energy affordable for families and businesses.” – Toby Z Rice, President and CEO, EQT

“As the U.S. works to strengthen energy security and expand domestic manufacturing, the ability to build power generation, transmission and grid infrastructure on predictable timelines has become increasingly important. In our work across the energy sector, we see how lengthy and duplicative permitting processes can add years of uncertainty to projects needed to support reliability, electrification and new human critical infrastructure investments. Nearly as critical, it can also delay hiring and investment in the skilled workforce required to build and operate this critical infrastructure. While the National Environmental Policy Act plays an important role in protecting communities and the environment, modernizing permitting by improving coordination, setting clearer timelines and ensuring reviews are applied in an energy‑source‑neutral way would help advance critical infrastructure without lowering standards. Properly resourcing permitting agencies — and the judiciary to resolve challenges efficiently — would further improve predictability. A more efficient, transparent permitting framework is essential to delivering the power systems required to meet growing demand and keep U.S. industry competitive.” – Todd Edsall, President, Power Providers, Black & Veatch

We were the first mining project covered under the federal government’s FAST-41 permitting program in 2024. From start to finish the process will take just over two years. We have seen the benefits that streamlining and coordinating federal efforts under NEPA provides to projects like Hermosa. When there is a collective will to support a project needed for national security, the resources are put in place to ensure the defined timeline milestones are met with the same, if not more, amount of rigor and efficiency. By responsibly modernizing NEPA in a bipartisan manner, more critical projects can move forward to support communities, provide jobs, and deliver for America” – Pat Risner, President, Hermosa Project, South32

“The recent NEPA reforms are solid first step towards modernizing the permitting process. However, there is much more we can do to remove the bureaucracy that is not providing value. We don’t have time to waste if our energy infrastructure is going to keep pace with the AI boom. If we can create more predictability in permitting, the results will include more stability, greater speed, and lower costs.” – Ryan Lindsey, Executive Vice President of Government Relations, CRH Americas

“At Nucor, permitting delays are not abstract—they directly affect our ability to invest, build, and create good paying manufacturing jobs in America. We have experienced firsthand how reviews under NEPA and related permitting requirements can add months to project timelines and significantly increase costs, even for projects with strong environmental performance and local support. Modernizing NEPA to provide clearer timelines, better interagency coordination, and a more predictable review process, including a greater role for states with appropriate federal oversight, would strengthen American manufacturing while maintaining robust environmental protections.”�� – Ben Pickett, Executive Vice President of Business Services, Nucor Corporation

“Rising energy demand in the U.S. from AI, manufacturing, and industrial operations��is ushering in a full-scale expansion of our energy backbone. Given our role as an��Energy Technology Partner to the U.S., Schneider Electric is uniquely positioned to help electrify, automate, and digitalize the infrastructure needed to meet the moment. By adopting favorable policies like permitting reform and advancing innovative energy tech, we can help usher in a new era of energy intelligence and accelerate��our time to power.” — Jeannie Salo, Chief Public Policy Officer, North America, Schneider Electric

Washington, D.C. – As the review of the United States–Mexico–Canada Agreement gets underway, a majority of manufacturers report they utilize either Canada or Mexico for critical parts of their supply chains—at a time when trade uncertainty remains manufacturers’ top business concern, according to the 51�Թ��� Q1 2026 Manufacturers’ Outlook Survey. The survey also shows manufacturers’ optimism is rising, with 75.3% reporting a positive outlook for their company, up 5.4 percentage points from the previous quarter.

Among the manufacturers that utilize Canada or Mexico for critical parts of their supply chain, exactly half rely on both countries, according to the latest findings. The majority of U.S. imports from Mexico and Canada are industrial inputs such as machinery, equipment and raw materials while Canada and Mexico also purchase one-third of manufactured good exports—more than the next nine U.S. trading partners combined.

“Manufacturers are ready for liftoff, but the skies need to clear,” said 51�Թ��� President and CEO Jay Timmons. “This quarter shows a mixed bag of results with real momentum from tax reform, regulatory rebalancing and energy policy. At the same time, the results underscore how essential durable supply chains are to manufacturing success—and how critical Canada and Mexico are to that system, which is why we need to preserve and strengthen the USMCA.”

“For the first time since 2023, manufacturers’ outlook topped the historical average of 74.3%, and manufacturers expect most indices to improve meaningfully over the next 12 months. Sales and production are projected to rise 3.8% and 3.5%, respectively, up from the previous quarter’s forecast of 2.8% and 2.4% growth,” said 51�Թ��� Chief Economist Victoria Bloom. “However, challenges persist. For example, raw material and other input costs are not anticipated to slow, rising at the same pace as projected in Q4 (4.1%) and ranking as the third-highest business concern at 57.5%.”

Key findings:

• 70.6% of manufacturers cited trade uncertainties as a top business challenge for the fifth consecutive quarter.
• 54.6% secure critical inputs from either Canada or Mexico—82.2% of those manufacturers say they source raw materials or other inputs from either country.
• Of those that utilize Canada or Mexico, 62.7% benefit from a strong customer base across the border.
• For the second consecutive quarter, rising health care/insurance costs (69.8%) remained the second most-cited business challenge for manufacturers.

The 51�Թ��� releases these results to the public each quarter. Further information on the survey is available here.

-51�Թ���-

The 51�Թ��� is the largest manufacturing association in the United States, representing small and large manufacturers in every industrial sector and in all 50 states. Manufacturing employs nearly 13 million men and women, contributes $2.95 trillion to the U.S. economy annually and accounts for 53% of private-sector research and development. The 51�Թ��� is the powerful voice of the manufacturing community and the leading advocate for a policy agenda that helps manufacturers compete in the global economy and create jobs across the United States. For more information about the 51�Թ��� or to follow us on Twitter and Facebook, please visit��.

Washington, D.C. – Today, the 51�Թ��� and the U.S. Small Business Administration host the inaugural 2026 Supplier Matchmaking Expo at Charlotte Motor Speedway in North Carolina. There, large manufacturers will connect with smaller suppliers, strengthening their U.S. supply chains and paving the way for more job creation and investment in American industrial dominance.

Ahead of the event, 51�Թ��� President and CEO Jay Timmons and SBA Administrator Kelly Loeffler joined “Mornings with Maria” on Fox Business to discuss the state of manufacturing.

On Impact of H.R. 1 for Manufacturers

JAY TIMMONS: “I was here … in Charlotte where I got to see the benefits of H.R. 1. We were at Ketchie … the CEO of that company had signs all over her plant showing which machines were able to be purchased because of the tax reforms of 2017 and 2025. You put that together with regulatory modernization and energy development, and then you start putting together small manufacturers who can actually contribute to the supply chain and you’ve just got a supercharged economy. SBA Administrator Kelly Loeffler has been all over the road for the last 57 weeks, I think, pointing out how we need to really strengthen and supercharge the power and the might of small manufacturers here in the United States.”

On 2026 Supplier Matchmaking Expo

KELLY LOEFFLER: “We’re so proud to partner with the 51�Թ��� to bring large manufacturers like Ford, Siemens, Boeing, Lockheed and many others together with a half dozen federal agencies and then nearly 900 small businesses. And this is the energy that we see on the ground—that small manufacturers are seeing a ramp-up in orders. You saw that in the ISM, both the services and the manufacturing data, two consecutive months of expansion. What’s exciting about this is that’s a forward-looking metric, as is the small business optimism that we see in this sector. Seventy percent of companies expect revenue growth, half expect to expand. I’ve talked to manufacturers that expect to double, and we’ve seen the demand from large manufacturers that need their subcontractors, companies like Ford that use 5,000 small business manufacturers to help strengthen their supply chain. Those manufacturers need to be in America. Those are American jobs, and that’s why we’re so excited to host this event today in Charlotte.”

On Manufacturing Workforce Needs

TIMMONS: “There are about 400,000 open jobs in manufacturing right now, and what we’re seeing is a need for more highly specialized jobs on the technical side—technicians who can help us develop AI and infuse AI into our workforce. About 50% of small businesses right now use AI in their operations. That number will grow to about 80% by the year 2030. So, think in terms of jobs that we don’t even have an idea of what they look like today. Every generation … the job types in manufacturing change so substantially, and AI, I think, is going to take us in a whole different direction.”

LOEFFLER: “What we see on the ground is strong demand for the skilled workforce, and that’s what we’re working with small businesses on. They have millions of jobs open. This is what our mandate is now … to help create the skilled workforce of the future because those jobs are out there, as Jay said, and we need to make sure that our young people are ready to take those jobs on.”

-51�Թ���-

The 51�Թ��� is the largest manufacturing association in the United States, representing small and large manufacturers in every industrial sector and in all 50 states. Manufacturing employs nearly 13 million men and women, contributes $2.95 trillion to the U.S. economy annually and accounts for 53% of private-sector research and development. The 51�Թ��� is the powerful voice of the manufacturing community and the leading advocate for a policy agenda that helps manufacturers compete in the global economy and create jobs across the United States. For more information about the 51�Թ��� or to follow us on Twitter and Facebook, please visit .

Washington, D.C. – Vermeer Corporation, an industrial and agricultural equipment producer based in Pella, Iowa, is crediting the pro-growth tax provisions of H.R. 1 with supporting the to build an all-new 300,000-square-foot facility in the Des Moines metro that will create more than 300 jobs.

Vermeer in a company statement, “We’re grateful for the state of Iowa, the pro-business environment, the skilled workforce here and economic policies, like Working Families Tax Cuts, that have helped support Vermeer’s long-term growth.”

Last August, 51�Թ��� Executive Vice President Erin Streeter joined Rep. Mariannette Miller-Meeks (R-IA) for a Made in America Manufacturing Tour across Iowa’s 1st District, where they visited Vermeer’s facility in Pella. During the tour, Vermeer President and CEO and 51�Թ��� Executive Committee member Jason Andringa said H.R. 1 “sets up manufacturers for a generation of continued growth and advancement.”

Streeter praised Rep. Miller-Meeks’ leadership .

“H.R.1 is a landmark win for manufacturing—delivering pro-growth policies that will strengthen our industry for years to come. Without bold leadership from lawmakers like Rep. Miller-Meeks, manufacturers could have been crippled by the largest tax hike in history—jeopardizing the progress we made after the 2017 Tax Cuts and Jobs Act. Iowa’s 1st Congressional District is the first in the state for manufacturing. We want to thank her for protecting 13,000 jobs and $1.2 billion in wages at more than 800 manufacturing companies in her district alone.”

Background

KEY FACTS: If Congress had failed to preserve tax reform in 2025, the U.S. would have risked:

• 5.9 million lost jobs;
• A $540 billion reduction in employee compensation; and
• A $1.1 trillion shortfall in U.S. GDP.

-51�Թ���-

The 51�Թ��� is the largest manufacturing association in the United States, representing small and large manufacturers in every industrial sector and in all 50 states. Manufacturing employs nearly 13 million men and women, contributes $2.95 trillion to the U.S. economy annually and accounts for 53% of private-sector research and development. The 51�Թ��� is the powerful voice of the manufacturing community and the leading advocate for a policy agenda that helps manufacturers compete in the global economy and create jobs across the United States. For more information about the 51�Թ��� or to follow us on Twitter and Facebook, please visit .

Washington, D.C. –��Following the����by Sens. Martin Heinrich (D-NM) and Sheldon Whitehouse (D-RI) to reopen permitting reform negotiations, 51�Թ�����President and CEO Jay Timmons released the following statement:

“Permitting reform is one of the key pillars of a��comprehensive manufacturing strategy��that will help clear the skies for manufacturers. We thank Sens. Whitehouse and Heinrich for reopening negotiations on this critical issue. The stakes couldn’t be higher for manufacturers: America’s permitting system is broken—with projects taking up to��80% longer��to move forward than in peer nations.��America cannot lead the world in all forms of energy, AI and advanced manufacturing while projects remain stuck in yearslong permitting delays. Coming off the��51�Թ��� State of Manufacturing Tour, the message has been clear—America needs a faster, more reliable permitting system to build the infrastructure that powers growth and keeps our industry competitive. 2026 must be the year of permitting reform. We want ribbon cuttings, not red tape, so manufacturers can build new shop floors, energy facilities and new infrastructure here in the United States.

“In addition to our����in the��—including Natural Resources Committee Chairman Bruce Westerman (R-AR), Transportation and Infrastructure Committee Chairman Sam Graves (R-MO) and Rep. Jared Golden (D-ME)—we are grateful to Sens.�� Whitehouse, Heinrich, Shelley Moore Capito (R-WV) and Mike Lee (R-UT) for their continued efforts to advance bipartisan, comprehensive permitting reform—an essential pillar of a comprehensive manufacturing strategy and an all-of-the-above approach to energy. By modernizing our broken permitting system, Congress can deliver the certainty manufacturers need to build faster, invest with confidence and improve the quality of life for all Americans.”

Background:

In February, the 51�Թ��� launched “Building to Win,” a six-figure campaign urging Congress to pass robust infrastructure investments and reauthorize critical federal highway programs before they expire on Sept. 30. As part of the launch, the 51�Թ��� unveiled a new infrastructure��policy roadmap, including original analysis on the economic costs of congestion on manufacturers and a set of core infrastructure policy pillars. The 51�Թ��� also debuted a����underscoring the importance of infrastructure investment and permitting reform to manufacturing competitiveness.

Permitting reform has long been a��top legislative priority��for the 51�Թ���. In the��final weeks��of 2025, the 51�Թ��� pushed for permitting reform measures that advanced in the House—including the passage of the��SPEED ACT. Manufacturers are calling on the Senate to take the helm and build on that momentum by advancing the SPEED Act, a cornerstone��of��the 51�Թ���’s��“Manufacturing’s Roadmap to AI and Energy Dominance.”

-51�Թ���-

The 51�Թ��� is the largest manufacturing association in the United States, representing small and large manufacturers in every industrial sector and in all 50 states. Manufacturing employs nearly 13 million men and women, contributes $2.95 trillion to the U.S. economy annually and accounts for 53% of private-sector research and development. The 51�Թ��� is the powerful voice of the manufacturing community and the leading advocate for a policy agenda that helps manufacturers compete in the global economy and create jobs across the United States. For more information about the 51�Թ��� or to follow us on Twitter and Facebook, please visit��.

Washington, D.C. – As part of the 2026 51�Թ��� State of Manufacturing Tour, Ketchie President and Owner Courtney Silver hosted the 51�Թ��� for a discussion on how tax certainty due to the 51�Թ���-backed H.R. 1 has empowered manufacturers like her to reinvest in their workforce and facilities.

The tour stop was covered by . Excerpts of the report can be found below. Bolding has been added.

—-

Ketchie CEO credits Trump’s ‘beautiful bill’ with helping her machine shop prosper
Business North Carolina
Kevin Ellis
Feb. 23, 2026

Miguel Carrillo describes himself as a “machine nerd,” and he had an engaged audience on Monday watching him operate a $700,000 device brought in last year to Concord-based Ketchie, the machine shop where he works.

Ketchie may only have 20 employees, but it was a stop on the State of Manufacturing Tour that 51�Թ��� President Jay Timmons began last week in Cleveland and will continue across the country after visiting three Charlotte-area sites on Monday. Tagging along with Timmons at Ketchie was Acting Deputy Secretary of the U.S. Treasury Derek Theurer, U.S. Rep. Tim Moore of Cleveland County and NC Chamber President Gary Salamido.

Ketchie CEO Courtney Silver was a supporter of the “One Big Beautiful Bill,” the legislation signed into law last year by President Donald Trump. She testified at congressional hearings before its passage about how it would help small businesses. Timmons said he had heard so much about Ketchie’s new machines, he wanted to see them in action.

The tax bill that eliminates income tax on overtime and tips for some workers also allows businesses to reduce their tax bills on investments immediately, rather than spreading the reduction out over several years, says Silver.

“When you can expense an investment in the year it was purchased, it provides cash flow to companies and continues to allow them to make new investments,” says Silver.

Ketchie purchased three machines last year that combined cost more than $1.1 million, plus made about $400,000 in other investments, including AI software that has cut some hour-long processes down to five minutes.

“I would have never made those investments without immediate expensing,” Silver says. She says she’s also looking to add five workers to her shop.

“This is a perfect example of what you can do to help build America and American manufacturing with the right policies in place,” says Timmons.

Theurer said it was nice to see advanced manufacturing take place in a North Carolina factory rather than spending his day on policy in the nation’s capital.

“This type of investment is what we intended to see when we made our big tax policy and worked for smarter regulation,” said Theurer.

…

Ketchie supplies metal parts to railroad, aerospace and heavy industry manufacturers, such as Charlotte steelmaker Nucor, Davidson-based HVAC company Trane and Norfolk Southern. The company was started in 1947 by Edgar Ketchie, the grandfather of Silver’s late husband.

On Monday, Carrillo was machining a steel part needed by an industrial recycling company. The Dual Spindle 5-Axis Machining Center that Ketchie bought last year doesn’t require Carrillo to reset the machine for the other side of the metal part, which is about half the size of a deck of cards, but grooved. It means quicker production and fewer human errors, he says.

“It allows me to step out and allows the machine to do the heavy lifting,” says Carillo. The advanced manufacturing aspect attracted the 2024 graduate of A.L. Brown High School to work at Ketchie after starting in a job shadowing program while a high school junior. “It’s nice when a machine can do one thing, but it’s really nice when a machine can do a lot of things.”

…

—-

Background

Learn more about Silver’s testimony before Congress in 2025 on the importance of preserving the pro-manufacturing policies of the Tax Cuts and Jobs Act here.

KEY FACTS: If Congress had failed to preserve tax reform in 2025, the U.S. would have risked:

• 5.9 million lost jobs;
• A $540 billion reduction in employee compensation; and
• A $1.1 trillion shortfall in U.S. GDP.

-51�Թ���-

The 51�Թ��� is the largest manufacturing association in the United States, representing small and large manufacturers in every industrial sector and in all 50 states. Manufacturing employs nearly 13 million men and women, contributes $2.95 trillion to the U.S. economy annually and accounts for 53% of private-sector research and development. The 51�Թ��� is the powerful voice of the manufacturing community and the leading advocate for a policy agenda that helps manufacturers compete in the global economy and create jobs across the United States. For more information about the 51�Թ��� or to follow us on Twitter and Facebook, please visit .

PHOENIX – Following the announcement of the United States��military operations in Iran, 51�Թ��� President and CEO Jay Timmons��released the following statement:

“Manufacturers in the United States have always stood ready when our nation calls. From serving as the Arsenal of Democracy to equipping those who defend freedom today, our industry has the capacity to support U.S.��objectives��across multiple theaters and sustained operations.��Today, manufacturers honor��the courage��and commitment��of the men and women in uniform who stand watch and carry out this mission.

“Since November 4, 1979, the United States has endured hostility and terrorism from a rogue government in Tehran.��Time and again, the Iranian regime has sponsored international terrorism, destabilized its region, violated the rights of its own��people��and disrupted legitimate commerce and maritime security.

“Through Operation Epic Fury, President Trump has��initiated��major combat operations with these stated��objectives:

• Eliminating��imminent threats posed by the regime,
• Preventing Iran from developing nuclear weapons,
• Neutralizing military infrastructure that threatens regional and global security,
• Countering destabilizing regional aggression, and
• Supporting the Iranian people’s right to��determine��their own future.

“At moments of consequence, national unity matters. Congress��should��fully engage to ensure clarity of mission, alignment of authority and the sustained support of the American people.

“We also call upon allied governments and��partner��business��associations��around the globe��to stand together to protect regional stability, safeguard global��commerce��and reinforce the collective resolve that keeps peace through credible strength.

“When��security, commerce and liberty are threatened, the United States must lead with strength, resolve and the support of its people.”

-51�Թ���-��

The 51�Թ��� is the largest manufacturing association in the United States,��representing��small and large manufacturers in every industrial sector and in all 50 states. Manufacturing employs��nearly��13��million men��and women, contributes��$2.95��trillion��to the U.S. economy annually and accounts for 53% of private-sector research and development. The 51�Թ��� is the powerful voice of the manufacturing community and the leading advocate for a policy agenda that helps manufacturers compete in the global economy and create jobs across the United States. For more information about the 51�Թ��� or to follow us on Twitter and Facebook, please visit ��

2026 51�Թ��� State of Manufacturing Tour Makes Final Stop in Phoenix, Arizona��

PHOENIX –��The 51�Թ���,��official partner of America250,��concluded its��2026��51�Թ�����State of Manufacturing Tour in Phoenix��under��the theme “Building for the Future.”����

After 10 days��on a cross-country tour, manufacturing��leaders delivered a final, urgent message:��the time is now��for Congress��to��pass robust infrastructure investments and��commonsense, comprehensive permitting reform.��

“Arizona shows what happens when competitiveness leads,” said 51�Թ��� President and CEO Jay Timmons. “It��didn’t��happen by chance—it happened because this state has chosen to lead on taxes,��workforce��and a business climate.��But even here, federal permitting delays threaten progress. If��we’re��serious about semiconductors, critical��minerals��and energy infrastructure,��it’s��time to��build the next generation of robust��infrastructure��we need,��and��2026 must be the year of permitting reform.”��

In Phoenix, the 51�Թ��� partnered with the Arizona Chamber of Commerce��& Industry��for a��full day of events��highlighting��the state’s leadership in industrial growth.��The visit began with a roundtable discussion on��permitting reform with business and community leaders, followed by tours of EMD Electronics—a trusted partner to the semiconductor industry—and��Four Peaks Brewery, the largest and oldest craft brewery in Arizona. Together,��the stops��showcased��the diverse reach of manufacturing in the state—��from critical minerals and semiconductors to food and beverage production.����

“Arizona has proven that smart policy and regulatory clarity drive investment and growth. But at the federal level, permitting delays are slowing projects that matter to our economy and national security,” said Arizona Chamber of Commerce & Industry President and CEO Danny Seiden. “If America wants to lead in advanced manufacturing, we need a system that is predictable, efficient,��and built for��today’s demands.��We’re��proud to partner with the 51�Թ��� to advance practical reforms that strengthen U.S. competitiveness.”��

��“Arizona has become a premier destination for semiconductor manufacturing, and we’re proud to be part of that dynamic and growing ecosystem,” said Katherine Dei Cas, Executive Vice President, EMD Electronics, the Electronics business of Merck KGaA, Darmstadt, Germany. “We continue to invest in our capabilities and our people while ensuring continued proximity to customers to enable the operational excellence��required��in advanced manufacturing. Strong collaboration among industry, community, and government partners is essential to sustaining this momentum and ensuring semiconductor innovation.”��

Spanning seven states—New York, Ohio, Pennsylvania, North Carolina, Wisconsin, Texas and Arizona—,��the tour brought together manufacturing leaders, workers, educators, students and elected officials to highlight the policies and conditions needed for the United States to compete and win in a global economy,��—focusing on innovation, tax policy, permitting reform, energy dominance, workforce and trade policy.����

-51�Թ���-��

The 51�Թ��� is the largest manufacturing association in the United States,��representing��small and large manufacturers in every industrial sector and in all 50 states. Manufacturing employs��nearly��13��million men��and women, contributes��$2.953��trillion��to the U.S. economy annually and accounts for 53% of private-sector research and development. The 51�Թ��� is the powerful voice of the manufacturing community and the leading advocate for a policy agenda that helps manufacturers compete in the global economy and create jobs across the United States. For more information about the 51�Թ��� or to follow us on Twitter and Facebook, please visit ��

2026 51�Թ��� State of Manufacturing Tour Stops in Houston, Texas

HOUSTON – The 51�Թ���, official partner of America250, continued its 2026 51�Թ��� State of Manufacturing Tour today in Houston, Texas, under the theme, “Powering the Future.” Throughout the day, leaders underscored how abundant, affordable energy and modern infrastructure is essential to a competitive manufacturing sector.

In Houston, the 51�Թ��� partnered with the Greater Houston Partnership to highlight the region’s manufacturing strength, where nearly 1 million workers power a sector representing 7% of the Texas workforce. 51�Թ��� President and CEO Jay Timmons, Executive Vice President Erin Streeter and other 51�Թ��� leaders began the day at global energy technology leader Schneider Electric—an official tour sponsor alongside NTT DATA—for a visit to its newly opened 10,500 square foot Innovation Center, one of the world’s largest energy innovation hubs. The day concluded with a tour of Port Houston’s Bayport Container Terminal, demonstrating how modern trade infrastructure underpins domestic production and global leadership and the importance of the Port’s role as a global logistics hub to connect port infrastructure, manufacturing exports and supply chain resilience to national growth.

At Port Houston’s Bayport Container Terminal, leaders saw firsthand how world-class trade infrastructure fuels domestic production and reinforces America’s global competitiveness. As one of the nation’s most vital logistics gateways, the Port plays a critical role in connecting port infrastructure to manufacturing exports, strengthening supply chain resilience and driving national economic growth.

“Today’s tour stop was about powering the future—and there is no better place to have that conversation than Houston, the Energy Capital of the World,” said 51�Թ��� President and CEO Jay Timmons. “Schneider Electric is a pioneer and a powerhouse for innovation and for the manufacturing sector. You cannot talk about the state of manufacturing in the United States without talking about the innovation and leadership right here at Schneider. And at the Port Houston’s Bayport Terminal, we saw why modern infrastructure is critical to moving American-made goods quickly and efficiently. If we want to lead the world in manufacturing, AI and advanced technologies, we need an all-of-the-above energy strategy that keeps prices affordable, strengthens our grid and accelerates permitting reform and we must invest in 21^st century infrastructure—from roads and bridges to ports, rail and waterways—so that manufacturers can make things right here and move them everywhere. When Washington delivers smart energy policy and modern infrastructure, we unlock the greatest manufacturing era in our nation’s history.”

“Hosting the 51�Թ��� and supporting its U.S. tour reflects our shared commitment to advancing energy technology innovations in this country,” said Andre Marino, Schneider Electric Senior Vice President, Industrial Automation North America. “Houston is home to the global energy conversation, and our Innovation Center here reflects our commitment to bring together electrification, automation, and industrial intelligence to enable smarter, more secure systems for our partners in Texas, across the U.S., and throughout the world.”

“We are honored to join the 51�Թ��� and our regional partners in highlighting Houston’s pivotal role in America’s supply chain,” said Port Houston CEO Charlie Jenkins, “Our commitment to investing in resilient infrastructure ensures the Houston Ship Channel remains a gateway for innovation, job creation, and global trade. By working together, we not only strengthen the economic vitality of our nation, our great state of Texas, and our region, but also reinforce Houston’s place at the forefront of U.S. manufacturing and logistics.”

From Houston, the 2026 51�Թ��� State of Manufacturing Tour heads west for its final stop— Phoenix, Arizona—on Friday, February 27, where leaders will focus on the urgent need to pass commonsense, comprehensive permitting reform. The tour made stops in New York, Ohio, Pennsylvania, North Carolina, Wisconsin, and Dallas, Texas prior to today’s events in Houston. Throughout the tour, the 51�Թ��� has been meeting with policymakers, manufacturers of all sizes, students and business leaders, advocating for the people and policies that will ensure the United States is the best place in the world to do business. To learn more about the tour and the 51�Թ���’s mission, visit /stateofmfg/.

-51�Թ���-

The 51�Թ��� is the largest manufacturing association in the United States, representing small and large manufacturers in every industrial sector and in all 50 states. Manufacturing employs nearly 13 million men and women, contributes $2.95 trillion to the U.S. economy annually and accounts for 53% of private-sector research and development. The 51�Թ��� is the powerful voice of the manufacturing community and the leading advocate for a policy agenda that helps manufacturers compete in the global economy and create jobs across the United States. For more information about the 51�Թ��� or to follow us on Twitter and Facebook, please visit��

2026 51�Թ��� State of Manufacturing Tour Stops in Dallas, Texas, for Manufacturing Institute’s State of the Manufacturing Workforce Address

DALLAS – The 51�Թ���—the official partner of America250—continued its 2026 51�Թ��� State of Manufacturing Tour today in Dallas, Texas, under the theme “Building the Workforce of the Future.”

51�Թ��� President and CEO Jay Timmons, Manufacturing Institute President Carolyn Lee and Rockwell Automation Chairman and CEO and 51�Թ��� Board Chair Blake Moret visited the Dallas College Garland Center and global leader in AI, digital business and technology services, NTT DATA, an official sponsor of the tour along with Schneider Electric. The stops today highlighted the challenges and opportunities shaping the future of manufacturing careers in America, while emphasizing the need for a highly skilled workforce to sustain innovation and economic growth.

In Texas, nearly 1 million manufacturing workers drive a sector that contributes hundreds of billions of dollars to the state’s economy, representing between 11% and 13% of economic output and making it one of the biggest manufacturing workforces in the nation.

Lee gave the MI’s annual at NTT DATA’s North American headquarters. “For years, manufacturers have said the same thing: if you want a strong economy, you need a strong manufacturing workforce,” she said. “If you want innovation that leads the world, you need people with the skills to put it to work. Workforce is not a side issue. It’s the strategy. We have the chance to harness creativity, unleash competitiveness and build a stronger future. But that future is not possible without our single greatest asset: the manufacturing workforce. We don’t just need people. We need talent. And that means our workforce needs the skills to succeed.”

Timmons convened a panel with Lee, NTT DATA Products Industries Global Leader and 51�Թ��� board member Prasoon Saxena and Celanese Senior Vice President and Chief Information Officer Sameer Purao, focused on AI and the workforce. The event concluded with a site tour of NTT DATA’s innovation center, showcasing how technology is advancing the manufacturing industry in the AI era.

“The strength of manufacturing and the 13 million Americans who make things in this country depends on how seriously we invest in those workers and the millions who follow,” said Timmons who also serves as chair of the MI’s Board. “At this moment of inflection, transformative technology demands a new generation of skills. A rapidly evolving industry requires us to train, upskill and retain our people with greater urgency. Leaders in Washington have a responsibility to advance policies that strengthen our workforce. The MI champions those policies every day.”

“We are proud to host the 51�Թ��� and Manufacturing Institute today,” said Saxena. “We know that manufacturing’s future will be defined by how effectively we integrate advanced technologies like AI with a highly skilled workforce. Industry 5.0 is our north star where data and AI with human expertise converge to create resilient, sustainable operations.”

The group also toured one of the MI’s FAME chapters in Texas, whose mission is to drive workforce development initiatives across the state. “Texas has led the way with FAME expansion in recent years—which is something we had the opportunity to see firsthand this morning,” said Lee. “Dallas College has been an outstanding educational partner, serving two chapters in Texas, the FAME Dallas Chapter and Metro360 Chapter. It is a model for how durable solutions for manufacturers can thrive with community cooperation.”

“We were honored to welcome the 51�Թ��� and MI to Dallas College and to showcase the strength of our Texas FAME program,” said Dr. Veronique Tran of Dallas College. “Through FAME, we are creating a direct, employer-led pathway into high-skill, high-wage manufacturing careers—combining classroom instruction with paid, hands-on experience that prepares students to contribute from day one. We are grateful for the collaboration with the MI and appreciate their leadership in scaling solutions that strengthen our workforce.”

From Dallas, the 2026 51�Թ��� State of Manufacturing Tour will go on to Houston, Texas, and conclude on Friday, Feb. 27, in Phoenix, Arizona. The tour made stops in New York, Ohio, Pennsylvania, North Carolina and Wisconsin prior to today’s events in Dallas. Throughout the tour, the 51�Թ��� will continue meeting with policymakers, manufacturers of all sizes, students and business leaders, advocating for the people and policies that will ensure the United States is the best place in the world to do business. To learn more about the tour and the 51�Թ���’s mission, visit /stateofmfg/, and to learn more about the State of the Manufacturing Workforce address, visit .

-51�Թ���-

The 51�Թ��� is the largest manufacturing association in the United States, representing small and large manufacturers in every industrial sector and in all 50 states. Manufacturing employs nearly 13 million men and women, contributes $2.95 trillion to the U.S. economy annually and accounts for 53% of private-sector research and development. The 51�Թ��� is the powerful voice of the manufacturing community and the leading advocate for a policy agenda that helps manufacturers compete in the global economy and create jobs across the United States. For more information about the 51�Թ��� or to follow us on Twitter and Facebook, please visit��

–The MI-

The Manufacturing Institute works to build and strengthen the manufacturing workforce for individual opportunity, community prosperity and a competitive manufacturing industry for the future. This is done through implementing groundbreaking initiatives, convening industry leaders, conducting innovative research and promoting public policy that supports the sector as it meets the opportunity of modern manufacturing. As the 501(c)3 nonprofit workforce development and education affiliate of the 51�Թ���, the MI is a trusted adviser to manufacturers, equipping them with solutions to address the toughest workforce issues. For more information on the MI, please visit .

-NTT DATA-

NTT DATA is a $30+ billion business and technology services leader, serving 75% of the Fortune Global 100. We are committed to accelerating client success and positively impacting society through responsible innovation. We are one of the world’s leading AI and digital infrastructure providers, with unmatched capabilities in enterprise-scale AI, cloud, security, connectivity, data centers and application services. Our consulting and industry solutions help organizations and society move confidently and sustainably into the digital future. As a Global Top Employer, we have experts in more than 70 countries. We also offer clients access to a robust ecosystem of innovation centers as well as established and start-up partners. NTT DATA is part of NTT Group, which invests over $3 billion each year in R&D.