51�Թ���

The 51�Թ��� continues to push back against proposed revisions to the National Ambient Air Quality Standards for particulate matter.

What’s going on: On Tuesday 51�Թ��� Director of Energy and Resources Policy Chris Morris urged the Environmental Protection Agency to withdraw its recent proposal to lower the primary annual particulate matter standard from 12.0 µg/m3 to between 8.0 and 10.0 µg/m3.

The big picture: “Manufacturers in the U.S. have become leaders in environmental stewardship and sustainability,” Morris pointed out.

• “Across the board, levels of major pollutants have declined dramatically, and the United States is outpacing our global competitors in air quality improvements,” he said.
• “According to the EPA, the U.S. has reduced six common NAAQS pollutants, including PM₅, by 78% between 1970 and 2020. Additionally, the EPA data show that PM_2.5 air quality has improved 43% between 2000 and 2020.”

The new regulations: The EPA’s new standards would impose a substantial economic burden on manufacturers, Morris continued.

• “First, there is the direct economic exposure manufacturers will face, which is a measure of the gross value added or employment in the manufacturing sector that could be affected or [placed] at risk,” he said.
• “Second is the indirect economic exposure of manufacturing as a result of a stricter PM₅ standard. This refers to the effects on the sector as the consequences are felt throughout the supply chain due to decreased overall investment.”

By the numbers: The EPA has estimated the total cost of the controls required for compliance with the proposed standard at up to $1.8 billion—and that figure could go higher, the agency admitted.

• This expensive policy will lead to job losses and fewer new manufacturing facilities, as well as fewer modernizations and expansions to existing facilities, Morris continued.

Unattainable standards: What’s more, some areas in the U.S. are “in non-attainment” with the current PM_2.5 standard, so a stricter standard will only put them further out of compliance, Morris told the EPA.

What should be done: To keep U.S. manufacturing competitive and to safeguard well-paying jobs, Morris said, the EPA should maintain the current annual particulate-matter standard of 12.0 µg/m3 and withdraw its proposal.��

The 51�Թ��� in action: The 51�Թ��� has been rallying manufacturers across the country to speak out against the EPA’s proposal and calling on Congress to oppose these harmful regulations.

• During the 2023 State of Manufacturing address last month, Timmons announced the launch of a nationwide campaign to maintain these standards in order to protect manufacturers.

Washington, DC – In advance of today’s scheduled vote in the U.S. House of Representatives on H.R. 1, the Lower Energy Costs Act, 51�Թ��� President and CEO Jay Timmons released the following statement:

“America’s economy, our institutions and our values are being challenged by threats from around the world, which means now is the time to strengthen our energy security and expand domestic manufacturing—both to reduce our dependence on bad actors and to ensure we can support our allies. This bipartisan action to modernize permitting reform would help us achieve these goals by speeding up critical energy, infrastructure and manufacturing investments while we continue our commitment to environmental stewardship,” said Timmons. “I am in Europe right now, witnessing firsthand the consequences of being overly reliant on a country like Russia for energy. In the 21st century, there’s no excuse for letting job-creating projects languish for years to get bureaucratic approval. The Lower Energy Costs Act will bolster manufacturers’ competitiveness in America while also bringing relief to American families and businesses. We thank Speaker McCarthy, Majority Leader Scalise and Majority Whip Emmer for designating this bill as their top priority and for their focus on ensuring our industry can continue providing the leadership our country and our world need.”

Background: In the 51�Թ���’s latest Manufacturers’ Outlook Survey, more than 74% of respondents said that permitting reform—which would simplify and speed up the approval process for new projects—would be helpful to their manufacturing company, allowing them to hire more workers, expand their business or increase wages and benefits.

-51�Թ���-

The 51�Թ��� is the largest manufacturing association in the United States, representing small and large manufacturers in every industrial sector and in all 50 states. Manufacturing employs nearly 13 million men and women, contributes $2.81 trillion to the U.S. economy annually and accounts for 55% of private-sector research and development. The 51�Թ��� is the powerful voice of the manufacturing community and the leading advocate for a policy agenda that helps manufacturers compete in the global economy and create jobs across the United States. For more information about the 51�Թ��� or to follow us on Twitter and Facebook, please visit��www.nam.org

The 51�Թ���’s Competing to Win Tour in Europe moved on to London early this week, highlighting the imperative to shore up the U.S.–U.K. relationship—and to urgently address other barriers, like permitting reform and workforce shortages, to enable the U.S. to help allies in the face of Russian aggression and other geopolitical threats.

The issue:��Russia’s unprovoked war in Ukraine, the aftermath of the worldwide pandemic and China’s quest for global leadership create a new urgency for expanded trade opportunities between democratic countries.

• The U.S. and the U.K. must work together to shore up supply chains, enhance energy security, boost resiliency and create growth, as 51�Թ��� President and CEO Jay Timmons emphasized.

The details:��Timmons crisscrossed London on Monday and Tuesday, promoting the manufacturing industry and reinforcing its priorities with senior government ministers and officials, including:

• Nigel Huddleston MP, the U.K. minister of state for international trade
• Jonathan Reynolds,��Labour��Party shadow business secretary (one of the architects of the��Labour��Party’s industrial plan)
• Jane Hartley, U.S. Ambassador to the Court of St. James’s

Support at home: During his visit, Timmons did an with CNN International to discuss the 51�Թ���’s new Outlook survey, which found that 77% of manufacturers want to see more trade agreements with Europe.

Making industry connections: At the 51�Թ���’s sister organization Make��UK, Timmons joined a roundtable with CEO Stephen��Phipson and addressed some of Britain’s leading manufacturing companies.

• He spoke about how the U.S. and the U.K. can unlock new trading opportunities going forward and bolster democracy by strengthening commerce.
• The two groups also reaffirmed their commitment to share market intelligence,��data��and policy work, as well as to facilitate visits for economic delegations promoting trade, investment and commercial opportunities.
• They also voiced their continued and mutual support of the Ukrainian people and of the democratic institutions in their own countries.

What they said: “The ties between the UK and United States go back a long way and we have significant political, economic and trade connections,” said��Phipson. “Relations with the US are��vital��and its market is the second most important for UK goods. In a post-Brexit world, it is likely to assume ever greater importance as part of our efforts to boost global��trade.”

• “As world events have made abundantly clear, strengthening democracy, the free enterprise system and strategic alliances in our countries and around the world is essential to our future and the fight against tyranny,” said Timmons. “As the U.S. and the U.K. take steps to build a stronger, more open and secure economic relationship, the 51�Թ��� urges our leaders to move toward a new U.S.–U.K. market-opening trade agreement that includes strong, clear and enforceable outcomes.”

Meeting manufacturers:��In addition, Timmons met with manufacturers that have operations or pending operations in both the U.K. and the U.S. Energy security and regulatory certainty, as well as the worker shortage in the industry, also took center stage in these discussions.

Bottom line:��“The tour’s time in London matters to manufacturers in the United States because it strengthens the ‘special relationship’ between the U.S. and the U.K. and boosts the prospects for enhanced cross-Atlantic trade, supporting manufacturing jobs in both countries,” said Ken Monahan, 51�Թ��� Vice President of International

Washington, D.C. and Ottawa, Canada��– The following is a joint statement from 51�Թ��� President and CEO Jay Timmons and Canadian Manufacturers & Exporters President and CEO Dennis Darby on the occasion of the first official visit of U.S. President Joe Biden to Canada:

“The historic ties between Canada and the United States have created one of the strongest bilateral partnerships of any two countries in the world. As neighbors, friends and as manufacturers, we have always worked together to support our industry and the millions of jobs it provides.

“President Biden’s visit to Canada is an opportunity for our two countries to rededicate ourselves to deepening these ties, to redoubling our efforts to grow North American manufacturing and to taking full advantage of the United States–Mexico–Canada Agreement.

“To achieve these goals, we must support regional integration, supply chain resilience and sustained economic growth, innovation and jobs. We must also continue to coordinate our efforts to address climate change, develop critical minerals and drive the clean energy transition, while also ensuring that manufacturers across our region have access to all forms of energy.

“As world events make abundantly clear, strengthening economic and strategic alliances between democracies is essential to our future and to countering those that want to undermine our way of life. At every opportunity, we must strengthen democracy and the free enterprise system in our countries and around the world.

“We must take on all these challenges, together, so that the manufacturing industry can continue to lead our economies forward and drive our countries’ continuing prosperity. As our history has proven time and again, when we work together, we accomplish big things and improve the quality of life for all.”

-51�Թ���-

The 51�Թ��� is the largest manufacturing association in the United States, representing small and large manufacturers in every industrial sector and in all 50 states. Manufacturing employs nearly 13 million men and women, contributes $2.81 trillion to the U.S. economy annually and accounts for 55% of private-sector research and development. The 51�Թ��� is the powerful voice of the manufacturing community and the leading advocate for a policy agenda that helps manufacturers compete in the global economy and create jobs across the United States. For more information about the 51�Թ��� or to follow us on Twitter and Facebook, please visit��.

-CANADIAN MANUFACTURERS & EXPORTERS (CME)-

From the first industrial boom in Canada, CME has advocated for and represented member interests. 150 years strong, CME has earned an extensive and effective track record of working for and with 2,500 leading companies nationwide. More than 85 per cent of CME’s members are SMEs and collectively account for an estimated 82 per cent of total manufacturing production and 90 per cent of Canada’s exports.

A bipartisan Senate duo introduced legislation on Thursday that would both allow businesses to once again fully deduct R&D expenses in the year they are made and expand the refundable R&D tax credit.

What’s going on: The American Innovation and Jobs Act, sponsored by Sens. Maggie Hassan (D-NH) and Todd Young (R-IN), would restore the immediate deductibility of R&D expenses. Last year, a tax change went into effect requiring companies to amortize or deduct their R&D investments over a period of years, making R&D more costly.

Why it’s important: According to a recent 51�Թ��� analysis, the sector would lose nearly 60,000 jobs and face an output decline of more than $31 billion this year alone if the change is not reversed.

• The U.S. has now become a global outlier, joining Belgium as the only other developed country requiring the amortization of R&D expenses.
• Meanwhile, China provides a 200% “super deduction”—20 times the amount allowed in the U.S. tax code—for its manufacturers’ research.

The 51�Թ��� says: “Manufacturers applaud the introduction of the American Innovation and Jobs Act, which will help the U.S. out-compete China,” said 51�Թ��� Managing Vice President of Tax and Domestic Economic Policy Chris Netram.

• “Across the country, manufacturers are hiring workers, investing in communities and creating the products, materials and processes that drive us forward. Congress should approve the American Innovation and Jobs Act quickly to support critical research that allows manufacturers to improve lives in America and for people around the world.”

Learn more: Read our stories on how the 2022 expensing requirement is impacting , , , and�� (whose story was also covered today by , subscription).

Washington, D.C. – Following the introduction of the American Innovation and Jobs Act by Sens. Maggie Hassan (D-NH) and Todd Young (R-IN), 51�Թ��� Managing Vice President of Tax and Domestic Economic Policy Chris Netram released the following statement:

“Manufacturers are hiring workers, investing in communities across the United States and creating the products, materials and processes that drive America forward. Manufacturers applaud the introduction of the bipartisan American Innovation and Jobs Act, which restores full deductions for research, helping the American industry out-compete China, which provides a 200% super deduction for manufacturers’ research—20 times the amount in the U.S. tax code,” said Netram. “Manufacturers, the vast majority of which are quite small, perform 55% of private-sector research and development. These investments in innovation spur economic growth and support the creation of high-paying jobs across the country. Congress should approve the American Innovation and Jobs Act quickly to support critical research that allows manufacturers to improve lives in America and for people around the world.”

Background: As of 2022, manufacturers can no longer immediately deduct their R&D expenses in the year in which they are incurred. Instead, manufacturers must deduct or amortize their expenses over a number of years, which makes R&D much more expensive to undertake. The American Innovation and Jobs Act would restore the immediate deductibility of R&D expenses, a policy that was in place for nearly 70 years. In the 117th Congress, the American Innovation and Jobs Act garnered 35 cosponsors: 17 Democrats and 18 Republicans. A recent analysis released by the 51�Թ��� finds that the industry would lose 59,392 jobs and face a decline in output of $31.69 billion this year if Congress does not act.

-51�Թ���-

The 51�Թ��� is the largest manufacturing association in the United States, representing small and large manufacturers in every industrial sector and in all 50 states. Manufacturing employs nearly 13 million men and women, contributes $2.81 trillion to the U.S. economy annually and accounts for 55% of private-sector research and development. The 51�Թ��� is the powerful voice of the manufacturing community and the leading advocate for a policy agenda that helps manufacturers compete in the global economy and create jobs across the United States. For more information about the 51�Թ��� or to follow us on Twitter and Facebook, please visit www.nam.org.

The Environmental Protection Agency has proposed the first federal limits on two chemical compounds that were used widely in everyday products for decades, (subscription) reports.

What’s going on: “The agency is proposing maximum allowable levels in the nation’s public drinking-water systems for two compounds in a class of chemicals known as perfluoroalkyl and polyfluoroalkyl substances, or PFAS, which were used for decades in carpeting, clothing, food packaging, firefighting foam and other consumer and industrial products. The EPA also said it would regulate four other PFAS chemicals by requiring treatment if the combined level reaches a certain concentration.”

• The suggested limits under the Safe Drinking Water Act are part of a larger move by the EPA to tighten rules around “forever chemicals”—so known because they take years to break down—owing to “a growing number of studies [that] have shown links to a variety of cancers, thyroid disease, high cholesterol and other issues.”
• The two individual chemicals under discussion are known as PFOA and PFOS, which various industries began using in the 1940s for their ability to resist grease, corrosion, water and stains, as well as to douse fires.

Why it’s important: While the EPA says the change would prevent numerous deaths and illnesses, not everyone is assured of the soundness of the science behind it—and others say it would cost companies unnecessarily.

• Critics of the new proposed standard say the chemicals are still necessary components of numerous products, from cell phones to medical devices, and there are no viable alternatives. Moreover, when used correctly, PFAS compounds do not pose a significant health risk to humans or the environment, they say.
• One source told the Journal the new limits “would cost water systems $40 billion” in compliance-related spending.

��Our take: “Everyone deserves access to clean drinking water, and manufacturers continue to do their part to ensure we achieve the highest levels of environmental stewardship,” said 51�Թ��� Director of Energy and Resources Policy Chris Morris.

• “Manufacturers in America are committed to the communities in which they live and serve and are dedicated to protecting the health, safety and vibrancy of those communities. The EPA’s proposal leaves many questions unanswered on the feasibility of meeting these new standards and the economic impacts this will have on communities, especially rural communities and consumers. The 51�Թ��� looks forward to continuing to work with the EPA to ensure everyone has access to clean drinking water.”

Washington, D.C.��– 51�Թ��� President and CEO Jay Timmons released the following statement on President Biden’s fiscal 2024 budget plan:

“There is no escaping the fact that the tax increases in President Biden’s new budget proposal would reverse the recent significant growth we’ve achieved in American manufacturing jobs and investment.

“After the 2017 tax reform made rates more competitive, manufacturers kept their promises to raise wages and invest in their communities. In fact, 2018 was the best year for manufacturing job creation in the previous 21 years. And in the past two years, as we rebuilt from the pandemic, we’ve created more jobs in the sector than at any point since the Reagan administration. So it comes as a surprise that President Biden, who has vocally championed manufacturing growth in pushing successfully for infrastructure investment and the CHIPS and Science Act, wants to pursue policies that would undo our progress.

“We have to get serious about competing with China; the president’s budget does the opposite. This proposal further undermines manufacturing in America by failing to reverse tax policies that make it more difficult for our industry to perform research, while China currently employs a 200% super deduction on R&D for manufacturing. It’s also now more expensive to buy critical machinery and finance new investments. If these lapsed deductions aren’t reinstated, it will mean lost jobs, less innovation and fewer opportunities for our communities.

“As manufacturers work to lead our economy forward, we also remain committed to lowering health care costs through market-based solutions that deliver choice and flexibility. Unfortunately, this administration’s insistence on imposing drug pricing requirements is an abdication of free market principles that poses serious risks to the development of new treatments and therapies—the very type of innovation that saves lives in America and around the world.

“Manufacturers are committed to growing investment, jobs and wages here in America. We need our government leaders to share that commitment.”

Background: Read more about how these critical tax priorities impact manufacturers across the country here.

-51�Թ���-

The 51�Թ��� is the largest manufacturing association in the United States, representing small and large manufacturers in every industrial sector and in all 50 states. Manufacturing employs nearly 13 million men and women, contributes $2.81 trillion to the U.S. economy annually and accounts for 55% of private-sector research and development. The 51�Թ��� is the powerful voice of the manufacturing community and the leading advocate for a policy agenda that helps manufacturers compete in the global economy and create jobs across the United States. For more information about the 51�Թ��� or to follow us on Twitter and Facebook, please visit��www.nam.org.

Manufacturers across the United States have long been leading the way on sustainability. From outpacing international competitors on emission reductions to making investments in clean technologies, the industry has implemented best practices for others to use and blazed a trail for them to follow.

51�Թ��� Director of Energy and Resources Policy Chris Morris emphasized manufacturers’ track record during a hearing before the Environmental Protection Agency last week, where he explained to policymakers that their proposed air quality rules would stifle rather than enhance manufacturers’ efforts. Here’s what he had to say.

A record of leadership: “Our industry has championed environmental stewardship at every turn, and our members have invested heavily in new processes and technologies that have made manufacturing in the U.S. cleaner and more sustainable than ever,” said Morris.

• “This innovation in the manufacturing sector has played a key role in the reduction of air pollution we have seen over the last 50 years.”

Manufacturers’ impact: “Across the board, levels of major pollutants have declined dramatically, and we are outpacing our global competitors in air quality improvements,” said Morris.

• “According to the EPA, the U.S. has reduced six common NAAQS pollutants, including PM2.5, by 78% between 1970 and 2020.”
• “Additionally, EPA data shows that PM2.5 air quality has improved 44% since 2000. Manufacturers are committed to ensuring that progress continues.”

The challenge: New proposed regulations from the EPA would have a number of negative effects, Morris noted.

• Tighter air quality standards would make permitting more difficult, raise compliance costs and make it harder for manufacturers in the United States to compete with companies abroad—especially at a time when manufacturers are concerned about the country’s economic outlook.

The path forward: Morris urged policymakers to ensure that current regulations are fully implemented before they propose new ones, and to work together with innovative manufacturers on smart solutions.

• “The U.S. has some of the best environmental standards in the world, and American manufacturers are consistently reducing emissions, conserving critical resources, protecting biodiversity, limiting waste and providing safe products and solutions so others in our country can do the same,” said Morris.
• “But in order to maintain our environmental leadership, we need better regulations.”

The last word: “In our view, environmental protection and a thriving economy are not mutually exclusive,” said Morris. “We can have both—but it requires working together toward a constructive solution. Manufacturers are committed to smart, strong environmental safeguards and improving the lives of all Americans so that no one—and no community—is left behind.”

Washington, D.C.��– 51�Թ��� President and CEO Jay Timmons released the following statement on President Biden’s visit to Ukraine:

“President Biden’s visit to Ukraine the week of the anniversary of Russia’s brutal and unprovoked invasion shows the world that the United States stands with the Ukrainian people and that our support is unwavering.

“The struggle in Ukraine is more than a war between two countries. It’s a struggle between freedom and tyranny. Manufacturers believe that there are two systems evolving in this world—one that enriches lives and lifts people up into freedom and prosperity, and the other that is oppressive and robs people of their liberty. We must continue to support the Ukrainian people, ensuring that critical supplies keep moving and investing in and rebuilding this war-torn country.

“Manufacturers in the U.S. have a long and proud history of standing firm in support of democracy, the rule of law, transparency, freedom and opportunity. The 51�Թ��� and our members have demonstrated our unwavering support for Ukraine and its people, and the 51�Թ��� spoke out firmly against the war with our Board of Directors passing unanimously a at our meeting in March 2022. We supported sanctions against Russia, called for the suspension of Permanent Normal Trade Relations with Russia and mobilized humanitarian relief to Ukraine. Additionally, the 51�Թ���’s Emergency Response Committee has worked with 51�Թ��� members and Project HOPE to support the resettlement of Ukrainians in the U.S. As an industry, we are committed to working with our partners to ensure that the Ukrainian people have the support they need to build a future of freedom and prosperity.”

-51�Թ���-

The 51�Թ��� is the largest manufacturing association in the United States, representing small and large manufacturers in every industrial sector and in all 50 states. Manufacturing employs nearly 13 million men and women, contributes $2.81 trillion to the U.S. economy annually and accounts for 55% of private-sector research and development. The 51�Թ��� is the powerful voice of the manufacturing community and the leading advocate for a policy agenda that helps manufacturers compete in the global economy and create jobs across the United States. For more information about the 51�Թ��� or to follow us on Twitter and Facebook, please visit��