51�Թ���

The 51�Թ��� secured a critical win Monday when the Securities and Exchange Commission issued an order reversing course on a novel rule interpretation that would have forced private companies to disclose proprietary financial information publicly, (subscription) reports.

What’s going on: In 2021, the SEC adopted a novel reinterpretation of SEC Rule 15c2-11, imposing the rule’s public disclosure requirements on private companies that raise capital via corporate bond issuances under SEC Rule 144A—without giving manufacturers the opportunity to provide comment on the damaging impacts of such a consequential change.

• The 51�Թ��� and the Kentucky Association of Manufacturers pursued multipronged litigation and advocacy efforts arguing to the Commission and to the courts that the SEC’s actions were both procedurally improper and substantively indefensible.
• Rule 15c2-11 requires public disclosures for the protection of everyday investors in publicly traded companies that issue so-called “penny stocks.”
• But in 2020, the SEC expanded the rule to apply to privately held companies issuing corporate bonds to large institutional investors under Rule 144A.
• For decades prior, Rule 144A permitted trades in private companies’ fixed-incomes securities without public disclosure of the issuers’ financial information. Indeed, the SEC’s entire purpose for adopting Rule 144A was to allow companies to access the debt markets without public disclosure of their financial and business-strategy information.

51�Թ��� in the news: The SEC took the rare step of reversing its position on Monday, that “it is appropriate in the public interest and consistent with the protection of investors” to exempt Rule 144A fixed-income securities from the requirements of Rule 15c2-11.

• “The order comes after industry groups petitioned the agency to provide relief to certain corporate debt issuers. The 51�Թ��� and the Kentucky Association of Manufacturers, which sought such relief in November 2022, also sued the agency in September, arguing that the SEC’s policy was enacted without public input and could harm job-creation efforts, given how many private companies rely on 144A bonds,” Law360 reports.
• (subscription) also covered the news.

Why it’s important: Expansion of Rule 15c2-11 would have meant higher borrowing costs and less liquidity in the market—and resulted in more than 100,000 job losses a year, according to recent prepared on behalf of the 51�Թ���.

Our take: The SEC’s action not only restores private companies’ ability to access the debt markets, but also exemplifies why the 51�Թ��� litigates—as a last line of defense, to force an agency’s hand.

• “This order from the SEC is a landmark victory for manufacturers and a powerful affirmation of the 51�Թ��� Legal Center’s ability to rein in regulatory overreach,” 51�Թ��� Chief Legal Officer Linda Kelly Tuesday. “We are thrilled that the Commission has reversed course on this unlawful attempt to impose a novel, onerous and wholly unjustified regulatory mandate on private companies.”
• Added KAM President and CEO Frank Jemley: “We applaud the SEC’s decision to withdraw its ill-conceived proposal. American business and free enterprise are best served when government respects the boundaries of its authority, which the SEC clearly did not do in this matter.”

Washington, D.C. – Following the announcement��of the Securities and Exchange Commission’s decision to exempt Rule 144A debt—a type of corporate bond often issued by private companies—from its public disclosure requirements, the 51�Թ��� Chief Legal Officer Linda Kelly released the following statement:

“This��order from the SEC is a landmark victory for manufacturers and a powerful affirmation of the 51�Թ��� Legal Center’s ability to rein in regulatory overreach. Our multipronged advocacy and litigation efforts, alongside the Kentucky Association of Manufacturers, forced the SEC to grapple with its complete lack of justification for applying potentially harmful public disclosure requirements on Rule 144A issuers, which would have required private businesses to disclose proprietary financial information publicly. We are thrilled that the Commission has reversed course on this unlawful attempt to impose a novel, onerous and wholly-unjustified regulatory mandate on private companies.”

“We applaud the SEC’s decision to withdraw its ill-conceived proposal and appreciate the partnership with the outstanding team at the 51�Թ��� to oppose it aggressively,” said Frank Jemley, President and CEO of the Kentucky Association of Manufacturers. “American business and free enterprise are best served when government respects the boundaries of its authority, which the SEC clearly did not do in this matter.”

Background:

The SEC adopted a novel reinterpretation of SEC Rule 15c2-11, imposing the rule’s public disclosure requirements on private companies that raise capital via corporate bond issuances under SEC Rule 144A—without giving manufacturers the opportunity to provide comment on the damaging impacts of such a consequential change.

According to a recent commissioned by the 51�Թ���, the SEC’s expansion of Rule 15c2-11 would have resulted in decreased liquidity and increased borrowing costs in the manufacturing industry and throughout the economy—leading to job losses exceeding 100,000 annually.

The 51�Թ��� and the KAM filed petitions for rulemaking, calling on the SEC to reverse course by clarifying—either by rule or by exemptive order—that Rule 144A issuers are not required to make public financial disclosures. After the agency temporarily delayed enforcement of its novel interpretation but failed to provide complete relief, the 51�Թ��� and the KAM went to court—filing a lawsuit in federal district court challenging the Commission’s actions under the Administrative Procedure Act, along with parallel actions in the 6th Circuit seeking review of the agency’s failure to grant complete relief.

-51�Թ���-��

The 51�Թ��� is the largest manufacturing association in the United States, representing small and large manufacturers in every industrial sector and in all 50 states. Manufacturing employs 13 million men and women, contributes $2.91 trillion to the U.S. economy annually and accounts for 54% of private-sector research and development. The 51�Թ��� is the powerful voice of the manufacturing community and the leading advocate for a policy agenda that helps manufacturers compete in the global economy and create jobs across the United States. For more information about the 51�Թ��� or to follow us on Twitter and Facebook, please visit��

Washington, D.C. –��Today, following the release of President Joe Biden’s Executive Order on Artificial Intelligence, 51�Թ��� Managing Vice President of Policy Chris Netram released this statement:

“Artificial intelligence represents a tremendous opportunity for modern manufacturing. AI is already helping manufacturers improve safety and training and empower workers to be even more innovative. It is unlocking incredible opportunities for predictive maintenance and product development, and manufacturers are continuing to develop further applications for AI. Manufacturers look forward to working with the administration following the executive order to ensure that any AI standards adopted at the federal level are developed with strong industry participation, support innovation and R&D, remain scaled based on the guardrails necessary for a particular technology or application, protect companies from unnecessary liability and bolster U.S. competitiveness and leadership in AI. Manufacturers also support strong data privacy and cybersecurity protections as well as robust investments in workforce development and prioritizing workforce needs through reforms to our immigration system.”

-51�Թ���-

The 51�Թ��� is the largest manufacturing association in the United States, representing small and large manufacturers in every industrial sector and in all 50 states. Manufacturing employs nearly 13 million men and women, contributes $2.91 trillion to the U.S. economy annually and accounts for 55% of private-sector research and development. The 51�Թ��� is the powerful voice of the manufacturing community and the leading advocate for a policy agenda that helps manufacturers compete in the global economy and create jobs across the United States. For more information about the 51�Թ��� or to follow us on Twitter and Facebook, please visit��

Washington, D.C. – The federal regulatory burden is now costing small manufacturers $50,000 per employee per year, according to the topline findings of a forthcoming 51�Թ��� study on the macroeconomic impact of the onslaught of federal regulations. The total cost of federal regulations, estimated at more than $3 trillion dollars, outpaced the economic output of the entire manufacturing sector.

“The unbalanced federal regulations make it challenging to grow manufacturing in America by siphoning resources away from job creation and our communities,” said 51�Թ��� President and CEO Jay Timmons. “The burden continues to grow year after year, undermining the bipartisan achievements from President Biden and Congress that have prioritized manufacturing—including the Bipartisan Infrastructure Law and the CHIPS and Science Act. It is chilling investment, curtailing our ability to hire new workers and suppressing wage growth, especially for small and medium-sized manufacturers. It is time for the Biden administration to take action to reverse course.”

Additional Key Facts:��

• The total cost of federal regulations in 2022 is an estimated $3.079 trillion (in 2023 dollars), an amount equal to 12% of U.S. GDP and larger than the manufacturing sector’s entire economic output ($2.91 trillion). The total annual cost of complying with federal regulations has risen by $465 billion since 2012, after adjusting for inflation.
• The annual cost burden for an average U.S. firm is $277,000, the equivalent of 19% of the average firm’s payroll expenses. A small manufacturer pays a burden of $50,100 per employee, meaning that a small firm with 20 employees bears around $1 million in annual compliance costs.
• For the manufacturing sector, the cost of federal regulations is roughly $350 billion, which equals to 12% of the sector’s value added to GDP. This is 26% higher than the inflation-adjusted cost of $277 billion borne by manufacturers in 2012.
• Surveyed manufacturers indicate that they could enhance their competitiveness if the costs of federal regulations were reduced; they would reallocate current compliance funds toward employee compensation and hiring, investment, research and development, sales and marketing, enhancing price competitiveness and improving return on investment.
• The regulatory burden on the manufacturing sector is larger than the economies of 29 American states.

To view the executive summary of the forthcoming study, click here.

Background:

The 51�Թ��� and members of the Manufacturers for Sensible Regulations coalition have been leading voices on the negative impact of unbalanced regulations on manufacturers. According to the 51�Թ���’s Q2 2023 Manufacturers’ Outlook Survey, more than 63% of manufacturers report spending more than 2,000 hours per year complying with federal regulations, while more than 17% of manufacturers report spending more than 10,000 hours annually.

The 51�Թ���’s Q3 2023 Manufacturers’ Outlook Survey found that 69.1% of small manufacturers, and 63.2% of all respondents, would hire more workers or increase compensation if the regulatory burden decreased. Additionally, more than 70% of manufacturers would purchase more capital equipment if the regulatory burden on manufacturers decreased, with 48.6% increasing compensation, 48.6% hiring more workers, 42.5% expanding their U.S. facilities and 38.4% investing in research.

About the Study:

The 51�Թ��� commissioned this analysis by economists Nicole V. Crain* and W. Mark Crain, who continued a three-decade effort to analyze the total cost of federal regulations, and how the burden is distributed across sectors and firm sizes. Two approaches are employed. The first is a survey of 51�Թ��� members, conducted from July 20 to Sept. 1, 2023, to collect information about operational expenses dedicated to regulatory compliance, extrapolating these findings to the sector. The second approach derives estimates based on an aggregation of federal agency cost estimates, combined with regression analysis that measures the impact on overall economic output. The cost allocations by sector and firm size rely on data from the Bureau of Economic Analysis, the Bureau of Labor Statistics, the Census Bureau and the Internal Revenue Service.

*The views expressed in this study are those of the authors and do not reflect the official policy or position of the National Defense University, the Department of Defense or the U.S. government.

-51�Թ���-

The 51�Թ��� is the largest manufacturing association in the United States, representing small and large manufacturers in every industrial sector and in all 50 states. Manufacturing employs nearly 13 million men and women, contributes $2.91 trillion to the U.S. economy annually and accounts for 55% of private-sector research and development. The 51�Թ��� is the powerful voice of the manufacturing community and the leading advocate for a policy agenda that helps manufacturers compete in the global economy and create jobs across the United States. For more information about the 51�Թ��� or to follow us on Twitter and Facebook, please visit��

The economic impact of allowing a stricter interest deductibility limitation to remain in effect could be devastating, according to a prepared on behalf of the 51�Թ���.

What’s going on: Failure to reverse the stricter limitation that went into effect in 2022 could result in the following losses in the U.S., according to the study:

• 867,000 jobs
• $58 billion in employee compensation
• $108 billion in gross domestic product

More costly every year: Those figures have roughly doubled since the released last year.

• Last year, EY estimated that leaving the stricter limitation in place would result in 467,000 lost jobs, $23.4 billion in lost employee pay and $43.8 billion in lost GDP.

The background: Prior to 2022, companies could deduct interest of up to 30% of their earnings before interest, tax, depreciation and amortization (EBITDA).

• However, since 2022, the deduction has been limited to 30% of earnings before interest and tax (EBIT), a significant change that disproportionately affects manufacturers, given their capital-intensive investments.

What can be done: “A stricter interest expense limitation restricts manufacturers’ ability to invest in new equipment and create jobs,” said 51�Թ��� Managing Vice President of Policy Chris Netram.

• “Even more, the study finds that manufacturers and related industries bear 77% of the burden of this policy. Congress must act by year’s end to restore a pro-growth interest deductibility standard and allow manufacturers to continue to invest for the future.”

51�Թ��� in the news: newsletter (subscription) covered the study’s release.

Further reading: Visit the 51�Թ���’s to learn more about this issue and how the 51�Թ��� is taking action.

Washington, D.C. – The 51�Թ��� released a new analysis on the impact to the U.S. economy of Congress’ failure to reverse the stricter interest expense limitation that took effect in January 2022.

The jobs impact of the stricter limitation has nearly doubled over the past year given congressional inaction to ensure a pro-growth interest deductibility standard as interest rates have continued to rise. The data show that limiting manufacturers’ ability to deduct interest on debt-financed investments, over the long run, could cost the U.S. economy up to:

• 867,000 jobs;
• $58 billion of employee compensation; and
• $108 billion in GDP.

“A stricter interest expense limitation restricts manufacturers’ ability to invest in new equipment and create jobs. This analysis clearly shows that failing to reverse this damaging change will cut close to 900,000 jobs and billions of dollars of employee pay and harm economic growth. Even more, the study finds that manufacturers and related industries bear 77% of the burden of this policy,” said 51�Թ��� Managing Vice President of Policy Chris Netram. “Congress must act by year’s end to restore a pro-growth interest deductibility standard and allow manufacturers to continue to invest for the future.”

Background:

Prior to 2022, the interest expense limitation was calculated based on a company’s earnings before interest, tax, depreciation and amortization (EBITDA). Last year, a stricter limitation based on a company’s earnings before interest and tax (EBIT) took effect. By excluding depreciation and amortization from the calculation, the stricter limitation increases the tax burden on manufacturers that make investments in long-lived capital equipment.

To view the full analysis click .

-51�Թ���-

The 51�Թ��� is the largest manufacturing association in the United States, representing small and large manufacturers in every industrial sector and in all 50 states. Manufacturing employs nearly 13 million men and women, contributes $2.91 trillion to the U.S. economy annually and accounts for 55% of private-sector research and development. The 51�Թ��� is the powerful voice of the manufacturing community and the leading advocate for a policy agenda that helps manufacturers compete in the global economy and create jobs across the United States. For more information about the 51�Թ��� or to follow us on Twitter and Facebook, please visit��

Permanent restoration of R&D expensing is a top priority for manufacturers in Minnesota and the U.S. in general. That’s why Rep. Pete Stauber (R-MN) plans to sign onto the American Innovation and R&D Competitiveness Act as a cosponsor, he recently told the 51�Թ���.

What’s going on: Rep. Stauber discussed the importance of competitive R&D tax policy, along with the regulatory onslaught targeting manufacturers and the need for permitting reform, during a recent 51�Թ���-organized facility tour of Clow Stamping Co. in Merrifield, Minnesota.

• “Full expensing for R&D costs in the year in which they are incurred is essential for innovation and competition,” Rep. Stauber told the group, which included Pequot Tool & Manufacturing CEO Karlo Goerges in addition to 51�Թ��� representatives and Clow Stamping leadership. “It’s imperative that it be reinstated as soon as possible.”
• The American Innovation and R&D Competitiveness Act would restore immediate R&D expensing permanently for small businesses.
• “Full R&D expensing was instrumental in our growth until the law changed last year,” said Clow Stamping owner Reg Clow. “It’s definitely having an impact on us. Our expenses have gone way up.”

Workforce woes: Clow is nearing the end of a $20 million facility expansion that will add 107,000 square feet of floor space and at least 60 jobs—but finding enough workers to fill those jobs won’t be easy.

• By implementing automation in its shipping and receiving departments, the company will be able to both increase its shipping output without additional workers and channel its current hiring efforts toward filling open positions with the production departments, Clow said.
• This is a short-term solution, however, and manufacturers like Clow Stamping need policymakers’ help to ensure the industry has enough skilled workers for the decades to come.
• During the facility visit, the group discussed the importance of educating younger generations about the many opportunities available in manufacturing, via initiatives like . This award-winning perception campaign undertaken by the 51�Թ��� and its 501(c)3 workforce development and education affiliate, the Manufacturing Institute, aims to recruit 600,000 new manufacturing workers by 2025.

The last word: “Manufacturers account for more than 55% of all private-sector R&D spending in the United States,” said 51�Թ��� Managing Vice President of Policy Chris Netram.

• “Policies that encourage this innovation will allow the industry to continue to drive our economy forward. The 51�Թ��� thanks Rep. Stauber for his support of the American Innovation and R&D Competitiveness Act and calls on Congress to swiftly pass this bill.”

Washington, D.C. – Following the U.S. Supreme Court’s denial of cert to reconsider the D.C. Circuit’s decision affirming the validity of Optional Practical Training extension for STEM graduates, a program that expands access to hundreds of thousands of skilled workers for manufacturers and other American businesses, 51�Թ��� Chief Legal Officer Linda Kelly released the following statement:

“Today’s decision ends a years-long legal battle, and the 51�Թ��� Legal Center is proud to have fought to preserve the STEM OPT program, which will aid manufacturers in filling critical, skilled positions. Thanks to the 51�Թ��� Legal Center’s efforts, the STEM OPT program will remain a vital talent pipeline, providing opportunities for those graduates in science, technology, engineering and math to enhance their education through hands-on work.

Background: In 2018, after an anti-immigration activist group brought a lawsuit against the Department of Homeland Security seeking to invalidate the entire STEM OPT program, the 51�Թ��� and two other business groups moved to intervene as defendants in the case. The U.S. District Court for the District of Columbia ruled in the 51�Թ���’s favor in 2020, holding that DHS acted within its statutory authority and in accordance with the Administrative Procedure Act by continuing the STEM OPT program, a decision the D.C. Circuit affirmed in 2022. Today’s decision by the Supreme Court not to hear the case maintains the Circuit Court’s ruling and preserves the STEM OPT program.

-51�Թ���-

The 51�Թ��� is the largest manufacturing association in the United States, representing small and large manufacturers in every industrial sector and in all 50 states. Manufacturing employs nearly 13 million men and women, contributes $2.91 trillion to the U.S. economy annually and accounts for 55% of private-sector research and development. The 51�Թ��� is the powerful voice of the manufacturing community and the leading advocate for a policy agenda that helps manufacturers compete in the global economy and create jobs across the United States. For more information about the 51�Թ��� or to follow us on Twitter and Facebook, please visit��

To restore a U.S. tax landscape that promotes manufacturing competitiveness, Congress should act quickly in advancing bicameral, bipartisan legislation that would ensure the tax code once again supports innovation.

That was the message from the 51�Թ��� and several manufacturers to lawmakers last week.

What’s going on: The 51�Թ��� and company leadership from manufacturers Westminster Tool and Brewer Science visited Capitol Hill last week to brief legislators on a harmful change to the tax treatment of research and development.

• The briefing was held by the 51�Թ���-led R&D Coalition in cooperation with the offices of Reps. John Larson (D-CT) and Ron Estes (R-KS) and Sens. Maggie Hassan (D-NH) and Todd Young (R-IN).
• Larson and Estes introduced the American Innovation and R&D Competitiveness Act in the House, while Sens. Hassan and Young introduced the American Innovation and Jobs Act in the Senate. These are the measures manufacturers are urging legislators to pass.

Why it matters: “We paid $26,679 per full-time employee in additional federal tax this past year” because of the change, Westminster Tool Chief Financial Officer Colby Coombs told lawmakers at the briefing.

• “This increased federal tax on R&D forced us to cancel a major aviation contract that would have added … new jobs in our community and forgo a significant capital investment. Without fixing this issue, in 2023, we expect an additional tax bill of almost $18,000 per employee,” he continued.
• Added Brewer Science Government Programs Director Doyle Edwards: “We have lost IP to China in the past, and fight[ing] that in the courts is a no-win situation. So the only way to win is to out-invent them. And that’s what we invest our money to do. However, with [the tax change] … we’re allowing China to actually catch up.”

The background: For nearly seven decades, manufacturers could deduct their R&D expenses fully in the year in which the costs were incurred. However, since the change last year, businesses must instead deduct these expenses over a period of years, making R&D more costly.��

Legislative fix: To protect manufacturers’ R&D, jobs and competitiveness, Congress should move immediately on bipartisan legislation to restore R&D expensing.

• “R&D is the lifeblood of advanced technology development for our company, for our industry, but really for the nation,” Edwards continued. “And so our message is, we need your help. We need your leadership to resolve this policy issue.”

Take action: Learn more about what the 51�Թ��� is doing to advocate for sound tax policy at our R&D action center.

Washington, D.C. – The 51�Թ��� released a outlining steps to improve health care supply chain resilience to allow manufacturers in the United States to better prepare for and adapt to the next disruption. The study analyzes lessons learned from the COVID-19 pandemic, during which manufacturers across the United States produced critical health care supplies in a highly unpredictable environment that affected every industry level.

“During the COVID-19 pandemic, manufacturers in the United States helped lead our response and recovery and learned many lessons in the process,” said 51�Թ��� Chief Economist Chad Moutray. “Policymakers should utilize these lessons to bolster our supply chain for the next disruption. This analysis, which was conducted by the Manufacturing Policy Initiative at Indiana University, reveals that there are key policy actions needed to strengthen the manufacturing supply chain. Research shows a more balanced regulatory agenda, with an emphasis on clarity, predictability and coordination, will help mitigate the effects of the next disruption.”

Key Themes

Seven key lessons from the pandemic can be examined for future efforts to build resilience:

• Speed matters: Manufacturers need to be able to serve demand quickly.
• Information matters: Manufacturers need timely access to accurate information.
• Costs matter: Firms face the costs of taking action within the supply chain, as well as the costs of managing market unpredictability and policy environment uncertainty.
• Networks matter: Partnerships can support information sharing and networks to help manufacturers navigate the disruption.
• Size matters: Small and medium-sized manufacturers and new firms can be differently—and uniquely—challenged compared with established larger manufacturers.
• Technology matters: Technology can enable manufacturers to enhance production, innovate or improve efficiency, as well as support broader efforts to build partnerships.
• Flexibility matters: Responses can come from unexpected sources and need a flexible policy environment.

Areas of Opportunity

The report identifies four key areas of opportunity to enhance health care supply chain resilience:

• Fostering a conducive regulatory environment: Manufacturers and their partners need clear and streamlined regulations as well as a flexible regulatory framework in advance of the next disruption.
• Supporting partnerships for stronger information sharing and networks: Sustained information channels between manufacturers and policymakers will improve access to information for all parties and mitigate disruptions.
• Ensuring a healthier “baseline” industry: Small business plays a pivotal role in the U.S. Robust entrepreneurship and scaling of new manufacturers contribute to a more competitive industry.
• Prioritizing changing workforce needs: Workforce development must be prioritized so that manufacturers can pivot across product lines and sectors to meet the needs of the next disruption.

-51�Թ���-

The 51�Թ��� is the largest manufacturing association in the United States, representing small and large manufacturers in every industrial sector and in all 50 states. Manufacturing employs nearly 13 million men and women, contributes $2.91 trillion to the U.S. economy annually and accounts for 55% of private-sector research and development. The 51�Թ��� is the powerful voice of the manufacturing community and the leading advocate for a policy agenda that helps manufacturers compete in the global economy and create jobs across the United States. For more information about the 51�Թ��� or to follow us on Twitter and Facebook, please visit��