51�Թ���

The big number: 74.4% of respondents in the cited the inability to attract and retain workers as their primary business concern, even amid signs of a cooling labor market. This is the third consecutive quarter in which this concern appeared at the top of respondents’ list.

• In the , more than 59% of manufacturers said that not having enough employees would impact their ability to make investments or expand.

Manufacturing: Manufacturing employment rose by 7,000 in June, continuing to seesaw from month to month over the year to date.

• The sector added just 15,000 workers during the first six months of 2023, slowing materially after adding a robust 385,000 and 390,000 employees in 2021 and 2022, respectively.
• More positively, there were 12,989,000 manufacturing employees in June, just shy of February’s total of 12,988,000, which was the most since November 2008.

Nonfarm payrolls: Nonfarm payroll employment rose by 209,000 in June, slowing from 306,000 in April but still a good figure. The U.S. economy has added 1,669,000 workers through the first half of 2023, a robust pace.

• The unemployment rate edged down from 3.7% in May to 3.6% in June, as the economy remains at or near “full employment.”
• The number of employed workers increased from 160,721,000 in May to 160,994,000 in June, which was not far from April’s record level (161,031,000). Those who were unemployed declined from 6,097,000 to 5,957,000.
• The labor force participation rate remained at 62.6% for the fourth straight month, the best rate since March 2020.

Job openings: There 604,000 manufacturing job openings in May, down from 668,000 in April and the lowest level since February 2021. Even with the overall labor market remaining solid, the number of job postings in the sector continues to cool notably, as expected.

• Total quits in the manufacturing sector rose to 293,000 in May, an 11-month high. In addition, total quits in the overall economy increased to 4.015,000, the most since December.
• With that said, layoffs in the manufacturing sector have also risen, up to 139,000 in May, the highest level since July 2020.
• Meanwhile, nonfarm business job openings declined from 10,320,000 in April to 9,824,000 in May, a solid reading. In May, there were 62.1 unemployed workers for every 100 job openings in the U.S. economy.

Wages: The average hourly earnings of production and nonsupervisory workers in manufacturing jumped 1.0% to $26.41 in June, with 5.6% growth over the past 12 months, up from 4.7% in May.  

➔  Key takeaway: Manufacturers continue to cite an inability to attract and retain workers as their top challenge. While there are signs that the labor market is cooling, both for manufacturers and the macroeconomy, employment remains not far from a 15-year high while wage growth continues to increase very solidly.

Speaking of the importance of flexibility, a survey of 5,700 onsite US workers in industries like manufacturing, transportation and health care found a mismatch between the flexibility options that companies provide and what employees actually want.

What companies are offering: The most common flexibility options that onsite workers reported were relaxed dress code (55%), flexible start and end times (33%) and choice over hours they worked (31%).

What onsite workers want: When asked what flexibility options they would change jobs to get, onsite workers reported increased paid time off or vacation time (57%) and four-day work weeks (44%).

Employee engagement matters: People with engaging work and one week of vacation report 25% higher well-being than actively disengaged workers who have six or more weeks of vacation, according to .

• Among those with fully onsite work responsibilities, Gallup finds that those with a four-day work week report lower active disengagement and higher overall well-being.

Lack of flexibility is a top workforce challenge for employees, according to a released by the MI. To address this concern and help employees attract and retain more workers, the MI has been convening manufacturing leaders to discuss flexibility solutions, identify what’s working and share insights. Here are some of the key takeaways.

The shop floor challenge: Flexible work arrangements for shop floor workers are different from those offered to office staff or remote workers, as manufacturers must fulfill in-person production requirements and timelines.

• Companies have gotten creative, testing out different options including compressed work weeks, rotating schedules, flex scheduling, shift swapping and phased retirements.

A data-driven approach: Participants in the MI’s working group conducted surveys to gauge the their employees wanted. Companies then assessed production needs before determining what flexibility options they would test, sometimes with the help of a consultant.

• One company collected data on recruitment and retention as part of their pilot to help evaluate its effectiveness.
• Other companies utilized employee engagement surveys to assess the success of their pilots.

Support system: Companies in the working group talked about the importance of creating support structures for flexibility plans.

• For example, one company hired a training and scheduling coordinator to manage their new systems. Others employed technology platforms to organize shifts.
• Supervisors also needed to be trained to handle new systems and manage flexibility requests while meeting production demands, the participants noted.

Stay tuned: The MI is planning to release a white paper based on the working group discussions in the fall.

As demand for raw materials escalates, mining companies in the U.S. are struggling to find enough workers to keep up, The Wall Street Journal (subscription).

What’s happening: The U.S. is advancing its green-energy transition while also developing new domestic sources of minerals to decrease reliance on China.

Workforce shortage: “The overall industry’s seasonally adjusted head count shrank by nearly 39% since 1990 … according to the Bureau of Labor Statistics.”

• While colleges and universities—not to mention companies themselves—are working to fill the gap, they are not turning out new workers fast enough.
• “‘The problem is that talent isn’t lying around waiting to be paid more—there just isn’t enough of it,’ said Andrea Brickey, an associate professor of mining engineering and management at the South Dakota School of Mines & Technology.”

Get help: If you are searching for ways to attract or upskill workers, the Manufacturing Institute (the 51�Թ���’s 501(c)3 workforce development and education affiliate) . It can also help you for manufacturing’s biggest opportunity to reach young people and prospective workers: MFG Day.

As job growth has risen in industries that don’t require college degrees, high school graduates are increasingly going directly into the workforce, according to (subscription).

The big number: “The college enrollment rate for recent U.S. high school graduates, ages 16 to 24, has declined to 62% last year from 66.2% in 2019.”

• At the same time, the unemployment rate for teenage workers fell to a 70-year low of 9.2% last month.

What’s happening: High school graduates are turning toward jobs that offer competitive wages, particularly in industries like manufacturing, without requiring a pricy degree beforehand.

• For example, machinists earn $23.32 an hour, above the national median wage of $22.26 an hour.
• “If you can get [a job] without a B.A. and with decent wage growth, why go get a B.A.?” as ZipRecruiter Chief Economist Julia Pollak put it.

Demand for training: Meanwhile, more young people are pursuing other forms of job training.

• “The number of apprentices has increased by more than 50%.”
• The changing economy has led to wider acceptance of forgoing college, as employers’ interest in hiring high school graduates has grown, according to Steve Boden, a supervisor at Maryland’s Montgomery County Public Schools.

What we’re doing: The Manufacturing Institute, the 51�Թ���’s 501(c)3 workforce development and education affiliate, has been training students so they can enter rewarding career paths that do not require degrees.

• , founded by Toyota in 2010 and currently operated by the MI, is a work/study career pathway program that provides education, training and certifications for the Advanced Manufacturing Technician occupational track.
• If you are interested in understanding the FAME model of skills or what it takes to join or start a chapter, sign up for an informational session .​�ċ�ċ�ċ�ċ�ċ�ċ�ċ�ċ�ċ�ċ�ċ�ċ�ċ

The 51�Թ��� is leading a coalition of business groups a potential new overtime rule from the Department of Labor.

The background: The current overtime rule, part of the Fair Labor Standards Act, mandates that employees must receive overtime pay of at least time and a half for hours worked over 40 in a workweek.

• However, it contains certain exemptions for white-collar workers. If an employee makes a minimum amount of money or is classified as an executive, administrator or professional, they are exempt from overtime pay.

The new rule: The new rule is expected to raise the salary threshold from the current $35,568 per year.

• ​​​​​​​The change would potentially cause challenges for employers, as well as for employees who have worked to advance themselves away from hourly jobs and into salaried company positions, as the 51�Թ��� has .
• In addition, the widespread adoption of hybrid work brought about by the pandemic “makes compliance with potential changes to the white-collar exemptions measurably more difficult,” the coalition pointed out. New regulations may force employers to restrict these work arrangements that many workers value highly.

The last word: As the coalition told the Department of Labor, “Many businesses are not well-positioned to absorb new labor costs associated with changes to the overtime pay regulations, and such changes would only exacerbate the difficulties businesses are currently facing”—including inflation, supply chain disruptions and the aftereffects of the pandemic.

When service members leave the military, manufacturers are quick to say: “Come on over!” Military skills are usually a great match for manufacturing careers, which require attention to detail, technical abilities and creative thinking. And there’s no better matchmaker than the Manufacturing Institute’s initiative, which since 2018 has been offering training certification programs and career courses to transitioning service members and veterans.

Today, HMA not only serves service members on military installations across the country but has also expanded its reach via a virtual training program.

Widening the reach: Now in its second year, the virtual training program has allowed HMA to impact service members on a national scale.

• For the first time, members from four branches—Army, Air Force, Marine Corps and Navy—are participating in the same class at the same time.
• Additionally, the geographic range of participants has increased to comprise students located far and wide, including in Alaska, Arizona, Delaware, Kansas and Kentucky.
• The program has reached more than 120,000 prospective students through local transition assistance, HMA’s and presence and the .

How it works: HMA partnered with Texas State Technical College to create a virtual nine-week training and certification program.

• Participants earn nationally portable, industry-recognized certification as well as an OSHA 10 certification.
• Through , HMA also partners with sponsors like Johnson & Johnson, The Caterpillar Foundation, Amazon, Howmet Aerospace, WestRock, Saint-Gobain, Atlas Copco, Cargill, FUCHS Lubricants Company, C.H. Guenther & Sons, Honda Foundation, Niagara Bottling and the NAFEM, PPI and SEMI Associations to connect program graduates and members of the military community with manufacturers.

What we’re saying: “It’s exciting to see members from four branches of the military all in one virtual classroom together,” said Heroes MAKE America Senior Program Manager Katie Bowerman. “There’s a lot of strength in that kind of diversity.”

Spread the word: Do you have jobs for which HMA students might qualify, or know of a service member who would want to join the program? The HMA virtual program is open to any transitioning service member who is in their last six months of active-duty service, as well as to veteran and active-duty military spouses. For more information, contact [email protected].

When service members leave the military, manufacturers are quick to say: “Come on over!” Military skills are usually a great match for manufacturing careers, which require attention to detail, technical abilities and creative thinking. And there’s no better matchmaker than the Manufacturing Institute’s initiative, which since 2018 has been offering training certification programs and career courses to transitioning service members and veterans.

Today, HMA not only serves service members on military installations across the country but also has expanded its reach via a virtual training program.

Widening the reach: Now in its second year, the virtual training program has allowed HMA to impact service members on a national scale.

• For the first time, members from four branches—Army, Air Force, Marine Corps and Navy—are participating in the same class at the same time.
• Additionally, the geographic range of participants has increased to comprise students located far and wide, including in Alaska, Arizona, Delaware, Kansas and Kentucky.
• The program has reached more than 120,000 prospective students through local transition assistance, HMA’s and presence and the ���ɱ�������ٱ�.

How it works: HMA partnered with Texas State Technical College to create a virtual nine-week training and certification program.

• Participants earn nationally portable, industry-recognized certification as well as an OSHA 10 certification.
• Through , HMA also partners with sponsors like Johnson & Johnson, The Caterpillar Foundation, Amazon, Howmet Aerospace, WestRock, Saint-Gobain, Atlas Copco, Cargill, FUCHS Lubricants Company, C.H. Guenther & Sons, Honda Foundation, Niagara Bottling and the NAFEM, PPI and SEMI associations to connect program graduates and members of the military community with manufacturers.

Read the full story .

Most people are satisfied with their jobs, according to a Washington Post–Ipsos poll about what workers want, (subscription) reports.

What’s going on: Following the pandemic and the Great Resignation, “about 8 in 10 workers are satisfied with their jobs, even as over 6 in 10 say work is stressful,” according to the survey of 1,148 workers ages 18 to 64.

• “While desire to work from home is a priority for some workers, pay, having a good boss or manager and other aspects of a job rank higher.”

Key takeaways: The poll had several notable findings, including the following:

• People prize remote work: Four in 10 respondents said their jobs can be done remotely. “Desire to work outside the office is high among remote-capable workers, with about 7 in 10 saying they’d choose to work from home “all of the time” (37 percent) or “most of the time” (35 percent).”
• Pay and bosses matter: “When asked to rank the most important factors in a job, 45 percent put pay in the top slot. Having a good boss comes in second, with 14 percent of workers ranking it as the most important.”
• The Gen Z difference: Gen Z and younger millennial workers prize promotion and advancement opportunities more highly than do their older counterparts.
• Friends at work: Some 55% of respondents said they have “close friendships” with coworkers.

The stress factor: “Stress varies sharply by age, with Gen Z workers the least likely to say their jobs are stressful (43 percent), compared to 61 percent of younger millennials 27-to-34 years old, 67 percent of 35-to-49-year-olds and 66 percent of workers 50-to-64 years old.”

Immigrants helped fill worker shortages last year, providing 60% of workforce growth according to Bureau of Labor Statistics data, reports (subscription).

The data: “Roughly 1.8 million foreign-born workers joined the labor force in 2022, compared with 1.3 million native-born ones, according to Bureau of Labor Statistics data published Thursday.”

• “The nation’s nearly 31 million immigrant workers now make up 18.5% of the labor force, close to a record-high share and above pre-Covid levels.”

Filling the gap: Immigrants are taking more roles in industries experiencing labor shortages, as compared to before the pandemic.

• “Almost 10% of immigrant workers had jobs in construction last year, up from 9.1% in 2019, according to the BLS. The share of foreign-born workers in health-care support occupations also increased.”

The 51�Թ��� says: “With over 800,000 job openings in manufacturing over the past 12 months, manufacturers know immigration is an essential part of the workforce solution to build a stronger, more competitive America, and that’s why the 51�Թ��� is unrelenting in leveraging every opportunity to advance our immigration plan ‘’ with key Hill and administration leaders and the press,” said 51�Թ��� Director of Human Resources and Innovation Policy Julia Bogue.